Sales order automation from customer PO to ERP
Customer service in a manufacturer spends hours keying purchase orders: part numbers, revisions, quantities, prices, delivery dates and ship-to addresses copied from PDFs into the ERP. We build a workflow that reads each PO as it arrives, checks parts, revisions and prices against the ERP, flags mismatches and creates a draft sales order for customer service to approve, then sends the order acknowledgement. A typical build costs $1,000 to $2,500 and takes about four weeks.
The problem
Why manual order entry causes rework
Every customer's PO looks different, and some arrive as PDFs, some as spreadsheets and some through a customer portal. Keying them is slow, and the costly mistakes are small: an old drawing revision, a price that differs from the quote, a delivery date inside your lead time.
Those mismatches should be caught before the order reaches planning. When they are found at shipment or invoicing, they turn into rework, expedites and credit notes.
What we build
What our sales order automation includes
PO capture
POs collected from the orders inbox and portal downloads into one queue, with change orders linked to the original.
Line reading
Part numbers, revisions, quantities, unit prices, dates and ship-to details read into draft order lines.
ERP checks
Each line checked against the part master, current revision, quoted price and standard lead time.
Mismatch flags
Old revisions, price differences, dates inside lead time and unknown parts highlighted for customer service.
Draft sales order
An approved draft created in the ERP through its API, with the PO attached.
Order acknowledgement
An acknowledgement drafted from the approved order, with any exceptions stated, sent on approval.
Who does what
Automation does the chasing, people make the calls.
-
01
Automated
PO arrives
A purchase order or change order lands in the orders inbox or portal.
-
02
Automated
Lines read
PO lines are read into a draft order format.
-
03
Automated
ERP checks
Parts, revisions, prices and dates are compared with ERP records.
-
04
Office review
Customer service approves
Staff resolve flags and approve the draft order and acknowledgement.
-
05
Estimator or quality manager decides
Commitments
Accepting non-standard dates, prices or revisions is decided by operations and sales management.
How it behaves
How order entry automation behaves
What the customer sees
- A prompt order acknowledgement
- Early questions about revisions, prices or dates
- Fewer surprises at shipment
What customer service sees
- Draft orders with the PO beside them
- Mismatches highlighted line by line
- Approved orders posted to the ERP
What the automation does
- Reads POs and links change orders
- Checks revisions, prices and lead times
- Never posts an order without approval
Edge cases and fallbacks
- Part number not in the ERP
- Flagged for customer service and engineering.
- Price differs from the quote
- Shown side by side; staff decide.
- Bill-to or remit details changed
- Held and flagged for phone verification.
- ERP API or AI outage
- POs stay in the inbox and staff are alerted to key them manually.
Architecture
Customer PO to sales order at a glance.
- Input
- Logic and services
- AI step
- People
- Data
How it flows
- 1 POs and change orders are captured from the orders inbox and portals.
- 2 Each PO is read into draft order lines.
- 3 Lines are checked against part revisions, quoted prices and lead times in the ERP.
- 4 Customer service resolves flags and approves, and the order and acknowledgement are created.
Project planner
How the project runs, phase by phase.
Customer PO to sales order entry project plan
Typical time to launch: about 4 weeks, then support
-
01
Discovery
2 to 3 days
Top customers' PO formats, ERP order fields, pricing rules and acknowledgement wording.
-
02
Design
2 to 3 days
Draft order format, checks, approval screen and change order handling.
-
03
Build
1 to 2 weeks
Capture, line reading, ERP checks, draft order and acknowledgement.
-
04
Shadow run
About 1 week
Drafts built for real POs while staff key orders as usual, compared line by line.
-
05
Launch
1 to 2 days
Start with the largest customers' formats.
-
06
Support
Ongoing
New customer formats and rule changes.
What it runs on
Real products only, connected through the access each vendor provides. See all integrations
Cost estimate
What it costs, line by line.
-
Discovery and design
PO formats, ERP fields and checks.
$200 – $450
-
Build
Capture, reading, checks, drafts and acknowledgements.
$500 – $1,250
-
Integrations
Mailbox and ERP API.
$150 – $400
-
Testing and shadow run
Line-by-line comparison on real POs.
$100 – $250
-
Launch and training
Switch-on and customer service walkthrough.
$50 – $150
-
Total project estimate
$1,000 – $2,500
Optional monthly care after launch is quoted with your proposal. Fixed quote after a free call. EDI 850 orders or customer portal automation may need a second workflow. AI usage and n8n are billed to you directly.
Monthly running costs you pay directly
Estimates from the vendors' published pricing, checked November 2026. Billed to you by each vendor, never marked up.
- AI model usage: Billed by the provider per use; small per PO.
- n8n: Self-hosted Community edition, or n8n Cloud from about €20 a month (Starter, billed annually).
What pushes cost up
- Systems without an API, or with integration access that must be requested from the vendor
- Writing data back into your core system rather than only reading from it
- Several locations, brands or very different processes to support
- Custom apps, dashboards or a voice line on top of the workflows
What keeps cost down
- One location and one clear process to start with
- Cloud software with a documented API
- Using tools you already pay for instead of adding new ones
- Approved wording and sample data ready at the start
Privacy and consent
Rules we design for, with the sources.
Bank and address changes on POs
IC3 advises verifying changes to invoices, bank details and contact information by phone; a changed bill-to or remit detail on a PO is flagged, never accepted automatically.
Source: www.ic3.govEU and UK: buyer contact data
Buyer names and emails on POs are personal data under GDPR and UK GDPR, used only for the order.
Source: gdpr-info.euRegulated parts
For medical device customers, 21 CFR 820.10 requires a quality system meeting ISO 13485, so revision and specification mismatches always go to a person.
Source: www.law.cornell.eduFree tools
Try these first, free.
How we deliver
Agile delivery, in 1 to 2 week sprints.
Every sprint
- 1 Sprint planning. At the start of each sprint we agree which backlog items we will finish, each with written acceptance criteria you can check.
- 2 Daily stand-up. A short internal check-in on progress and blockers. You get a written update in your Slack or Teams channel, not another meeting.
- 3 Sprint review and demo. At the end of each sprint we demo what was built on test data or in a shadow run, and you accept it or ask for changes.
- 4 Retrospective. The team looks at what went well and what to change in the next sprint, and we share anything that affects you.
How scope stays under control
- Product backlog
- Every feature, fix and question in one prioritised list you can see at any time.
- Acceptance criteria
- Plain-language conditions for "done" on each item, agreed before work starts.
- Change requests
- New ideas go into the backlog with an estimate. Nothing changes scope or price without your written approval.
- User acceptance testing (UAT)
- Before launch your team tests the real workflow against the acceptance criteria and signs off.
Tools we use
Project manager / Scrum master
Runs the sprints, keeps the backlog and timeline honest, and is your single point of contact.
Business analyst
Maps how the work runs today, writes the workflow specification and acceptance criteria with your team.
Automation engineer
Builds the n8n workflows, integrations, AI steps and error handling.
Backend developer
Writes custom code where a no-code step is not enough: APIs, data sync, secure storage.
Frontend / mobile developer
Builds forms, booking pages, dashboards, web apps or Android apps when the project needs them.
QA engineer
Tests every workflow against the acceptance criteria, including edge cases and failure paths.
DevOps engineer
Sets up hosting, access, backups, monitoring and alerts, and the deployment pipeline.
Who does what at each phase
- Free call
- Project manager, business analyst
- Understand the problem, check it is worth automating and outline a rough range.
- Discovery
- Business analyst, automation engineer
- Map the current process, systems and data, and agree success measures.
- Design
- Business analyst, automation engineer, backend developer
- Write the workflow specification, data flows, compliance notes and backlog with acceptance criteria.
- Sprints
- Automation engineer, developers, QA
- Build, test and demo in 1 to 2 week sprints; you accept or adjust after each demo.
- UAT and launch
- QA, DevOps, project manager
- Your team tests and signs off, we switch on, monitor closely and train the team.
- Support
- Automation engineer, DevOps
- Stabilisation window, then optional monthly care with monitoring and changes.
A point of contact
One person who can answer questions and approve decisions, with about an hour a week during the project.
Access
Admin or API access to the systems involved, created as separate accounts with the least access needed.
Sample data
Real but non-sensitive records (or de-identified ones) so we can design and test against reality.
Approved wording
Message templates, policies and consent wording (for SMS, your opt-in and opt-out text) reviewed by you.
Vendor agreements
Signed agreements with the software vendors that will handle personal data, such as a BAA or processor contract.
Time for testing
A few hours from the people who will use the system, for the demos and user acceptance testing.
Working system
Workflows, integrations and any apps running in your accounts, under your keys.
Documentation
Workflow specification, data-flow map, run book and exported workflow files.
Training
A walkthrough for the team and a short recorded video for new starters.
Handover
All access, credentials and code handed over; you can keep us or take it in-house.
Stabilisation window
Fixes for anything that does not meet the agreed acceptance criteria after launch.
Support options after launch
No plan
You run it yourselves after the stabilisation window and contact us when you need a change.
Monthly care
Monitoring, error alerts, small changes and updates each month, with an agreed response time.
Priority care
Faster response times for business-critical workflows and a monthly review call.
How a project moves through our team
- Input
- Logic and services
- People
- Output
- Data
How it flows
- 1 A free call with the project manager and business analyst to understand the problem and whether it is worth building.
- 2 Discovery and design produce a written specification, data-flow map and a backlog with acceptance criteria.
- 3 The team builds in 1 to 2 week sprints; you review a demo at the end of each and accept or adjust.
- 4 Your team runs user acceptance testing, we launch, then monitor and improve under a support plan.
FAQ
Customer PO to sales order entry questions, answered.
Turning incoming customer purchase orders into sales orders in your ERP with less typing: reading the PO, checking it against your records and creating a draft for a person to approve.
Yes, an AI step reads the PO, and rules check it against the ERP. The rules, not the AI, decide what is flagged, and a person approves every order.
Business Central through its salesOrders API, Epicor Kinetic through REST services, SAP Business One through the Service Layer, Katana through its sales order API and Odoo where your plan includes API access. Others are confirmed per project.
That is our supplier PO follow-up service. Many manufacturers start with customer POs and add supplier chasing next.
A change order is linked to the original and the differences are highlighted for customer service to approve.
Time from PO received to order entered, corrections per order, orders with mismatches caught before planning and acknowledgement turnaround.
Free 20-minute call
Want this for your manufacturer?
Book a free 20-minute call. We will look at how the work runs today, tell you honestly whether it is worth building and give you a fixed quote if it is.
More for manufacturers
All servicesManufacturing CRM & B2B account pipeline
RFQs, distributor and rep leads, and repeat-order accounts in one manufacturing CRM, with quote follow-ups, reorder reminders from ERP history and a weekly view of quotes won by customer and part family.
From $1,000 · About 4 weeks Details
RFQ intake & quote preparation
Every RFQ read on arrival: drawings, quantities, materials, finishes, tolerances flagged and due dates listed for the estimator, supplier prices requested for outside work and a draft quote ready to price.
From $1,000 · About 4 to 5 weeks Details
Supplier PO confirmations & delivery chasing
Purchase orders confirmed, late deliveries chased and supplier certificates requested automatically, with a daily list for buyers of what is at risk against job dates and any bank-detail change held for a phone check.
From $1,000 · About 4 weeks Details